Stainless Steel

SSP has made its mark through the fabrication of stainless steel. The primary uses for stainless steel are food safe or sanitary applications and situations where the possibility of corrosion is present. Stainless steel is also popular in residential and commercial spaces for its clean, cosmetic look. The most common grade of stainless steel that is commercially available is Type 304, which is used over 90% of the time where stainless is desired. In especially corrosive situations, such as salt water environments, Type 316 SS can be used. We have the ability to work with all grades, however, including Inconel, Monel, and other exotic alloys. Stainless steel is available in a number of finishes, from a smooth annealed finish (#2B) to a light cosmetic brush finish (#3 or #4), or even a mirror polish (#8).

Material: 16ga T304 Stainless Steel

Finish: #4 Brush

Description: Necropsy Table

Application: This is a table manufactured for a local primate quarantine facility for examining deceased specimens. Besides sanitary surfaces, provisions were made for fume exhaust and fluid drainage. The table has numerous removable inserts and pans built into it.

Material: 16ga T304 Stainless Steel

Finish: #3 Brush

Description: Residential Countertop

Application: This is one of many kitchen countertops we have manufactured. This one has marine edges to contain spills, a grooved edge to accept a wooden trim, and required two separate flat-welds to assemble. There is no backsplash, although that is available, and there is a cut-out provided for the drop-in sink.

Material: 16ga T304 Stainless Steel

Finish: #4 brush, Hand brushed

Description: Drop-in Coved Corner Double Sink with Integrated Drainboard

Application: This is a truly unique sink. It is built on a radius with fully integrated sink bowls and drain boards for a sleek, seamless look. Integrated drain boards eliminate spills and the seamless joints provide convenience in cleaning.

Material: 11ga T304 Stainless Steel

Finish: #4 Brush, Hand brushed

Description: Fascia and control panel for Hydraulic Control Trailer

Application: This is a typical setup found in trailers used in oil field applications where hydraulic lines are controlled remotely. This construction provides sturdiness in rough environments, easy to clean surfaces, and a clean professional look.

Material: 12ga T304 Stainless Steel

Finish: #2B Mill

Description: Customized Plate

Application: This is an example of our mass-production capabilities with our two Omax water jet machines. Pieces are produced cleanly, accurately, and reliably. This application was not cosmetic in nature, so a bright finish was not necessary. In such cases, a #2B soft annealed finish is sufficient.

Material: 11ga T304 Stainless Steel

Finish: #2B Mill; White Powder-Coat

Description: Electrical enclosure with HMI panel adaptor

Application: Customized electrical enclosures are one of our staple products, used in refineries, plants, oil rigs, and many other environments. Any configuration of buttons, instruments, or hardware can be incorporated into the design.

ssp-darkblue